KTS Insulating dowel

Insulating dowel SIMPY DRILLING – IS – PLUG PE

– Insulating dowel with coarse, conical thread and flat head
– Suitable for rigid foam boards and other soft building materials
– Secure hold due to material displacement and compression of the foam
– Made of high quality, impact resistant polyamide
– Resistant to UV radiation and weathering
– Insulating effect, sound insulation and vapor barrier remain intact
– No cold bridges
– Simple and fast assembly
– Processing possible without pre-drilling or special tools

– Screw directly into the substrate without pre-drilling
– Preferably used for refrigeration, air conditioning, insulation and facade construction
– Also plasterers and plasterers, as well as roofing, installation and
Electrical installation companies use the insulating plug


Performance data IS – dowel
DimensionIS 50 mmIS 95 – 8 mmIS 95 – 10 mm
Max. Dowel Ø mm203030
ToolsBit Torx 30Bit Torx 55 or
Ring / open-end wrench SW 17
Ring / open-end wrench SW 17
Packaging unit50/50050/25050/250
Weight per packing unit12.0 kg.18.0 kg.18.0 kg.
Mounting instruction
The KTS IS anchor is simply screwed in without pre-drilling using an existing universal tool with Torx insert or a ring/open-end wrench.
IS 50Chipboard, sheet metal or wood screw Ø 4.0 – 4.5 mm
IS 95Hexagon head screw M 8 or wood screw Ø 8 mm
Mean value of pull-out force (transverse) in N
Dowel designationMaximum force in N
IS 50171
IS 95315

This information should be considered as a general recommendation. It is expressly pointed out that this information does not apply to cases relevant to building regulations. They do not constitute an approval.