Hollow block dowel Ø 8 mm – HDK-TRUCKER
RANGE OF APPLICATION: concrete, perforated bricks, hollow blocks, sand-lime bricks, aerated concrete, lightweight concrete, solid pumice blocks, etc.
The KTS hollow block anchor Ø 8 mm is an all-rounder. The extended spreading part guarantees maximum load capacity. With its long shaft, this anchor bridges any attachments and non-load-bearing layers. By using a screw with a special thread, the anchor knots itself in the cavity of the building material.
This information should be considered as a general recommendation. This information should be regarded as general recommendations. More specifically, please note that these plugs and anchors may not be used for work subject to building inspections (e.g. for securing façade substructures, roofs etc.).
* Safety factor 3
| Performance data hollow block dowel Ø 8 mm – HDK-Trucker | |||||
|---|---|---|---|---|---|
| Small packaging | 8 x 80 mm | 8 x 100 mm | 8 x 120 mm | 8 x 140 mm | |
| Article-No. | 1250808044 | 1250810044 | 1250812044 | 1250814044 | |
| Packaging unit | Piece | 100/ 1.000 | 100 / 1.000 | 100 / 500 | 100 / 500 |
| Weight per packing unit | 13.3 kg. | 17.0 kg. | 9.4 kg. | 10.75 kg. | |
| Screws TORX Ø mm | 4,7 x 85 | 4,7 x 105 | 4,7 x 125 | 4,7 x 145 | |
| Factory test hollow block dowel Ø 8 mm – HDK-Trucker | ||||
|---|---|---|---|---|
| Material: NYLON (polyamide 6) | ||||
| Diameter mm | 8 | 8 | 8 | 8 |
| Length mm | 80 | 100 | 120 | 140 |
| Drill hole Ø mm | 8 | 8 | 8 | 8 |
| Minimum drill hole depth mm | 90 | 110 | 130 | 150 |
| Minimum installation depth mm | 80 | 100 | 120 | 140 |
| Clamping range mm | 35 | 55 | 75 | 100 |
| Pull-out value plasterboard (kN)* | 2,43 | 2,59 | – | – |
| Pull-out value for hollow bricks (kN)* | – | – | 2,809 | 2,765 |
