Fin plug – FD – RACER

The KTS fin anchor can be used universally in conjunction with wood and chipboard screws. High quality polyamide (nylon) provides resistance to weathering and aging.

RANGE OF APPLICATION: All concrete and masonry construction materials, perforated bricks, aerated concrete and lightweight panels.

This information should be considered as a general recommendation. This information should be regarded as general recommendations. More specifically, please note that these plugs and anchors may not be used for work subject to building inspections (e.g. for securing façade substructures, roofs etc.).

* Safety factor 5

Technical data FD – Dowel
Item number / small packagePackaging unitWeight per packing unit
5 x 25 mm1010502511100 / 10.0003.8 kg.
6 x 30 mm1010602511100 / 10.0006.6 kg.
8 x 40 mm1010802511100 / 5.0006.7 kg.
10 x 50 mm101100251150 / 2.5007.0 kg.
12 x 60 mm101120251125 / 1.2505.8 kg.
14 x 70 mm101140251120 / 8006.5 kg.
16 x 80 mm101160251110 / 4005.9 kg.
20 x 90 mm10120025115 / 2004.9 kg.

 

Factory test FD – Dowel
Material: NYLON (polyamide 6)
Diameter mm5681012141620
Length mm2530405060708090
Drill hole Ø mm5681012141620
Minimum hole depth mm30405060708090100
Minimum installation depth mm2530405060708090
Screws Ø mm2,5 – 4,03,5 – 5,04,5 – 6,06,0 – 8,08,0 – 10,010,0 – 12,012,0 – 14,016,0
Concrete pull-out value (kN)*0,500,752,187,202,003,004,005,50
Pull-out value of sand-lime brick (kN)*0,360,841,615,12